Placa Distribución de Energía PDB

Características
– Dimensions: 36 x 36mm
– Weight: 6g
– Mounting holes 30.5mm square spacing

General:
– Input voltage range (3S-6S operation): 9 – 26VDC
– Regulated 5V and 12V outputs
– LED power indicators (5V & 12V outputs)
– 4 ESC outputs

ESC Outputs:
– Continuous current: 20A per output
– Peak current (10 seconds/minute): 25A per output

BEC 5V Output:
– Designed for RC Receivers, Flight controllers, OSD, and Servos.
– DC/DC synchronous buck regulator, Efficiency is up to 95%.
– Voltage: 5.0 +/- 0.1VDC
– Continuous current: 3 Amps
– Short-circuit tolerant (10 seconds/minute)
– LED (indicates voltage is in regulation)

BEC 12V Output:
– The battery should be 4S~6S LiPo
– Standard output designed to power cameras and video transmitters,etc.
– Voltage: 12.0 +/- 0.2VDC
– Continuous current: 2 Amps (Max 3A 10s/minute)
– Short-circuit tolerant (10 seconds/minute)
– LED (indicates voltage is in regulation)

CAM & VTX Voltage Bridge:
– 3S operation. choose “VCC” for 12V camera & 12V VTX, VCC=Battery Voltage.
– 4~6S operation, choose “12” for 12V camera & 12V VTX
– 3~6S operation, choose “5” for 5V camera
– Video pass through from the “CAM” pad to the “VTX” pad